For your safety, perform all listed inspections and maintenance to keep your
vehicle
in good condition. If you become aware of any abnormality (noise, smell,
insufficient
brake fluid, oil residue on the ground, etc...
Other information:
You can turn the auto high-beam system off. If you want to turn the system
off or
on, turn the ignition switch to ON
*1 , then carry out the following procedures
while the vehicle is stationary.
*1: Models with the smart entry system have an ENGINE START/STOP
button instead of an ignition switch...
Make sure the engine and radiator are cool.
Turn the reserve tank cap 1/8 turn
counterclockwise and relieve any pressure
in the coolant system.
Push down and turn the reserve tank cap
counter-clockwise to remove it.
Pour coolant into the reserve tank until it
reaches the MAX mark...