Honda CR-V: Controls / Opening and Closing the Windows
The power windows can be opened and closed when the ignition switch is in ON
*1 , using the switches on the
doors. The driver side switches can be used to open
and close all the windows.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
The power window lock button on the driver side must be switched off (not pushed in, indicator off) to open and close the windows from anywhere other than the driver's seat.
When the power window lock button is switched on (pushed in, indicator on), you can only operate the driver's window. Turn the power window lock button on if a child is in the vehicle.
WARNING
Closing a power window on someone's hands or fingers can cause serious injury.
Make sure your passengers are away from the windows before closing them.
The power windows can be operated for up to 10 minutes after you turn the ignition switch off *1 .
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Opening either front door cancels this function.
Auto Reverse
If a power window senses resistance when closing automatically, it stops closing and reverse direction.
The driver’s window auto reverse function is disabled when you continuously pull up the switch.
The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.
You cannot fully open the rear windows.
- Opening/Closing Windows with Auto-Open/Close Function
- Opening/Closing Windows without Auto-Open/Close Function
- Opening Windows and the Moonroof* or Panoramic Roof *1 with the Remote
- Opening/Closing Windows and the Moonroof* or Panoramic Roof *1 with the Key
Security System Alarm*
* Not available on all models
The security system alarm activates when the tailgate, hood or doors are
forcibly
opened. The alarm does not go off if the tailgate or doors are opened with the
key,
remote transmitter or smart entry system...
Opening/Closing Windows with Auto-Open/Close Function
Automatic operation
To open: Push the switch down firmly.
To close: Pull the switch up firmly.
The window opens or closes completely. To
stop the window at any time, push or pull the
switch briefly...
Other information:
Honda CR-V 2017-2024 Owner's Manual: How to Use the Auto High-Beam
When all of the following conditions have been met, the auto high-beam indicator comes on and the auto high-beam is activated. The ignition switch is in ON *1 . The light switch is in AUTO. The lever is in the low beam position. The headlights have been automatically activated...
Honda CR-V 2017-2024 Owner's Manual: Shift Lever Does Not Move
Follow the procedure below if you cannot move the shift lever out of the position. Releasing the Lock Set the parking brake. Models without smart entry systemRemove the key from the ignition switch. Models with smart entry system Remove the built-in key from the smart entry remote...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Multi-View Rear Camera
- Compass Zone Selection
- How to Use the Auto High-Beam
- New on site
- Most important about car
Auto High-Beam
The front sensor camera detects the light sources ahead of the vehicle such as the lights of a preceding or oncoming vehicle, or street lights. When you are driving at night, the system automatically switches the headlights between low beam and high beam depending on the situation.
