Honda CR-V: Interior Lights/Interior Convenience Items / Accessory Power Sockets
The accessory power sockets can be used when the ignition switch is in
ACCESSORY 
or ON
*1 .
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Accessory power socket in the console compartment
Open the console lid and the cover to use it.
Accessory power socket (cargo area) *2
*2: Canadian models only, if equipped
Open the cover to use it.
NOTICE
Do not insert an automotive type cigarette lighter element.
This can overheat the power socket.
The accessory power socket is designed to supply power for 12-volt DC accessories that are rated 180 watts or less (15 amps).
To prevent battery drain, only use the power socket with the engine running.
Beverage Holders
Front seat beverage holders
Are located in the console between the front
seats.
Rear seat beverage holders
Fold the armrest down to use the rear seat
beverage holders...
Wireless Charger*
* Not available on all models
To use the wireless charger, the power mode must be in ACCESSORY or ON.
Charge a compatible device on the area indicated by the
mark as follows:
To turn the system on and off, press and
hold the
(power) button...
Other information:
Honda CR-V 2017-2026 Owner's Manual: Rear Cargo Cover*
* Not available on all models The rear cargo cover can be used to conceal items in the cargo area and protect them from direct sunlight. To extend: Slightly lift up on the handle at the center edge of the cover to unhook each end, then pull the cover rearward and clip the mounting rods in the hooks at both sides of the tailgate opening...
Honda CR-V 2017-2026 Owner's Manual: Programming Tailgate Position
The extent to which the power tailgate automatically opens can be programed. To program: Open the tailgate to the desired position. If you want to reprogram the power tailgate to open all the way, manually raise the tailgate to its upper most position and follow the next step...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Oil Check
- Auto Idle Stop System ON/OFF
- Quick Reference Guide
- New on site
- Most important about car
Auto High-Beam
The front sensor camera detects the light sources ahead of the vehicle such as the lights of a preceding or oncoming vehicle, or street lights. When you are driving at night, the system automatically switches the headlights between low beam and high beam depending on the situation.
