Honda CR-V: Instrument Panel / Indicators
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Canadian models only: Apply and hold the brake pedal before turning the ignition on.
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface. Press
the 
(display/information) button to see the message again with the system message
indicator on.
Models without smart entry system
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
Models with smart entry system
* Not available on all models
Models with LED headlight
Models with remote engine starter
* Not available on all models
Models with power tailgate
Models with real time AWD with intelligent control system ™
* Not available on all models
Other information:
Honda CR-V 2017-2025 Owner's Manual: Starting to Drive
When the engine was started using the button * on the smart entry remote Depress the brake pedal and press the ENGINE START/STOP button simultaneously. The engine stops when the shift lever is moved out of before the ENGINE START/STOP button is pressed...
Honda CR-V 2017-2025 Owner's Manual: Maintenance Items Under the Hood
Opening the Hood Park the vehicle on a level surface, and set the parking brake. Pull the hood release handle under the lower left corner of the dashboard. The hood will pop up slightly. Push the hood latch lever (located under the front edge of the hood to the center) to the side and raise the hood...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Jump Starting Procedure
- Interior Fuse Box
- Wallpaper Setup
- New on site
- Most important about car
Locking/Unlocking the Doors Using a Key
If the smart entry remote battery or the vehicle battery is dead, use the key instead of the smart entry remote.
Fully insert the key and turn it.
