Honda CR-V: Driver Information Interface / Switching the Display
Honda CR-V 2017-2025 Owner's Manual / Instrument Panel / Gauges and Displays / Driver Information Interface / Switching the Display
Main displays
Press the 
(display/information) button and press
or
to change
the display. Press ENTER to see detailed information.
* Not available on all models
Trip computer
Press the 
(TRIP) knob to change the display.
Driver Information Interface
The driver information interface shows the odometer, trip meter, outside
temperature indicator, and other gauges.
It also displays important messages such as warnings and other helpful
information...
Odometer and Trip Meter
Odometer
Shows the total number of miles (U.S.) or kilometers (Canada) that your
vehicle has accumulated.
Trip Meter
Shows the total number of miles (U...
Other information:
Honda CR-V 2017-2025 Owner's Manual: TPMS Calibration
You must start TPMS calibration every time you: Adjust the pressure in one or more tires. Rotate the tires. Replace one or more tires. Before calibrating the TPMS: Set the cold tire pressure in all four tires. Make sure: The vehicle is at a complete stop...
Honda CR-V 2017-2025 Owner's Manual: Emergency Engine Stop
Models with smart entry system The ENGINE START/STOP button may be used to stop the engine due to an emergency situation even while driving. If you must stop the engine, do either of the following operations: Press and hold the ENGINE START/STOP button for about two seconds...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Auto Idle Stop System ON/OFF
- Oil Check
- Wallpaper Setup
- New on site
- Most important about car
Auto High-Beam
The front sensor camera detects the light sources ahead of the vehicle such as the lights of a preceding or oncoming vehicle, or street lights. When you are driving at night, the system automatically switches the headlights between low beam and high beam depending on the situation.
Copyright © 2025 www.hocrv.com