Honda CR-V: Operating the Switches Around the Steering Wheel / Fog Lights*
* Not available on all models
Can be used when the low beam headlights are on.
Rotate the switch up from the OFF position to the
position.
When the fog lights are on, the indicator in the instrument panel will be on.
They go off when the headlights turn off, or when the daytime running lights are on.
Automatic Lighting Off Feature
Models with smart entry system
The headlights, all other exterior lights, and the instrument panel lights
turn off 15
seconds after you set the power mode to VEHICLE OFF (LOCK), take the remote with
you, and close the driver’s door...
Auto High-Beam
The front sensor camera detects the light sources ahead of the vehicle such
as the
lights of a preceding or oncoming vehicle, or street lights. When you are
driving at
night, the system automatically switches the headlights between low beam and
high
beam depending on the situation...
Other information:
Honda CR-V 2017-2025 Owner's Manual: Turbo Engine Vehicle
The scheduled maintenance intervals for replacing the filter is indicated on the driver information interface. Follow the information of when to replace them. The temperature gauge pointer is at the mark when you restart the engine after driving under high load conditions such as at high speed or in hilly terrain...
Honda CR-V 2017-2025 Owner's Manual: Setting Up Apple CarPlay™
After you have connected your iPhone to the system via the 1.5A USB port, use the following procedure to set up Apple CarPlay™ . Use of Apple CarPlay™ will result in the transmission of certain user and vehicle information (such as vehicle location, speed, and status) to your iPhone to enhance the Apple CarPlay™ experience...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Auto Idle Stop System ON/OFF
- Compass Zone Selection
- Odometer and Trip Meter
- New on site
- Most important about car
Seat Belt Reminder
The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts.
If the ignition switch is turned to ON
*1 and
a seat belt is not fastened, a beeper will sound
and the indicator will blink. After a few
seconds, the beeper will stop and the
indicator will come on and remain illuminated
until the seat belt is fastened.
Copyright © 2025 www.hocrv.com