Honda CR-V: About Your Seat Belts / Seat Belt Reminder
The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts.
If the ignition switch is turned to ON
*1 and
a seat belt is not fastened, a beeper will sound
and the indicator will blink. After a few
seconds, the beeper will stop and the
indicator will come on and remain illuminated
until the seat belt is fastened.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
The beeper will periodically sound and the indicator will blink while the vehicle is moving until the seat belt is fastened.
The indicator will also come on if a front passenger
does not fasten their seat belt within six seconds after
the ignition switch is turned to ON 
*1.
When no one is sitting in the front passenger’s seat,
the indicator will not come on and the beeper will not
sound.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
The indicator also may not come on and the beeper may not sound when the occupant is not heavy enough to trigger the weight sensor. Such occupants (e.g., infants and smaller children) should be moved to the rear seat as a deploying front airbag likely will injure or kill them.
About Your Seat Belts
Seat belts are the single most effective safety device because they keep you
connected to the vehicle so that you can take advantage of many built-in safety
features...
Automatic Seat Belt Tensioners
The front seats are equipped with automatic seat belt tensioners to enhance
safety.
The tensioners automatically tighten the front seat belts during a
moderate-to-severe frontal collision, sometimes even if the collision is not
severe enough to
inflate the front airbags...
Other information:
Honda CR-V 2017-2025 Owner's Manual: Changing the Rear Wiper Blade Rubber
Raise the wiper arm off. Pivot the bottom end of the holder up until it comes off from the wiper arm. Slide the blade out of the holder. Remove the retainers from wiper blade and mount to a new rubber blade. Slide the new wiper blade onto the holder...
Honda CR-V 2017-2025 Owner's Manual: Tire Pressure Monitoring System (TPMS)
Instead of directly measuring the pressure in each tire, the TPMS on this vehicle monitors and compares the rolling radius and rotational characteristics of each wheel and tire while you are driving to determine if one or more tires are significantly under-inflated...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Multi-View Rear Camera
- Display Setup
- How to Turn Off the Auto High-Beam
- New on site
- Most important about car
Auto High-Beam
The front sensor camera detects the light sources ahead of the vehicle such as the lights of a preceding or oncoming vehicle, or street lights. When you are driving at night, the system automatically switches the headlights between low beam and high beam depending on the situation.
