Honda CR-V: Light Switches / Headlight Integration with Wipers
The headlights automatically come on when the wipers are used several times
within
a certain number of intervals with the headlight switch in AUTO.
The headlights automatically go off a few minutes later if the wipers are
stopped.
This feature activates while the headlights are off in AUTO.
At dark ambient light levels, the automatic lighting
control feature turns on the headlights, regardless of
the number of wiper sweeps.
Automatic lighting control can be used when
the ignition switch is in ON *1 .
*1: Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch...
Models with smart entry system
The headlights, all other exterior lights, and the instrument panel lights
turn off 15
seconds after you set the power mode to VEHICLE OFF (LOCK), take the remote with
you, and close the driver’s door...
Other information:
Testing of Readiness Codes
Your vehicle has readiness code as part of the onboard self diagnostic
system.
Some States use these codes for testing to verify whether your vehicle's
emissions
components are working properly.
The codes may not be read properly if testing is performed just after the
battery has
gone dead or been disconnected...
The system has three alert stages for a possible collision. However,
depending on circumstances, the CMBS™ may not go through all of
the stages before initiating the last stage.
CMBS™ On and Off
Press and hold the button until the beeper
sounds to switch the system on or off...