Honda CR-V: Indicator, Coming On/Blinking / If the Charging System Indicator Comes On

Reasons for the indicator to come on
Comes on when the battery is not being charged.
What to do when the indicator comes on
Turn off the climate control system, rear defogger, and other electrical
systems. Immediately contact a dealer for repairs.
If you need to stop temporarily, do not turn off the
engine. Restarting the engine may rapidly discharge
the battery.
Reasons for the indicator to come on
Comes on when the engine oil pressure is low.
What to do as soon as the indicator comes on
Immediately park the vehicle on level ground in a safe place...
Reasons for the indicator lamp to come on or blink
Comes on when there is a problem with the engine emissions control
system.
Blinks when engine misfiring is detected...
Other information:
Testing of Readiness Codes
Your vehicle has readiness code as part of the onboard self diagnostic
system.
Some States use these codes for testing to verify whether your vehicle's
emissions
components are working properly.
The codes may not be read properly if testing is performed just after the
battery has
gone dead or been disconnected...
Reset the Maintenance Minder display if you have performed the maintenance
service.
Turn the ignition switch to ON
*1 .
Press the
(display/information) button repeatedly until the
appears.
Press the ENTER button.
Press and hold the ENTER button for about 10 seconds to enter the
reset mode...