Honda CR-V: Interior Lights/Interior Convenience Items / Front Seat Heaters*
* Not available on all models
The power mode must be in ON to use the
seat heaters.

Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)
When the power mode is turn on after it is
turned off, the previous setting of seat heaters
is maintained.

WARNING
Heat induced burns are possible when
using seat heaters.
Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.
Do not use the seat heaters even in LO when the
engine is off. Under such conditions, the battery may
be weakened, making the engine difficult to start.
After a certain period of time, the strength setting for
the front seat heater will automatically be reduced by
one level at a time until the seat heater shuts off. The
elapsed time varies according to the interior
environment.
*: Canadian models only, if equipped
The power mode must be in ON to use the
heated steering wheel.
Press the button on the right side of the
steering wheel...
*: Canadian models only, if equipped
There is no heater in the rear center seating
position.
Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)
The rear seat heaters is turned off every time
you start the engine, even if you turned it on
the last time you drove the vehicle...
Other information:
The life of your tires is dependent on many factors, including driving habits,
road
conditions, vehicle loading, inflation pressure, maintenance history, speed, and
environmental conditions (even when the tires are not in use).
In addition to regular inspections and inflation pressure maintenance, it is
recommended that you have annual inspections performed once the tires reach five
years old...
Models with smart entry system
If the beeper sounds and the To Start, Hold Remote Near Start
Button message
appears on the driver information interface; and the ENGINE START/STOP
button
flashes and the engine will not start. Start the engine as follows:
Touch the center of the ENGINE START/
STOP button with the H logo on the smart
entry remote while the ENGINE START/STOP button is flashing...