Honda CR-V: Maintenance / Checking and Maintaining Wiper Blades

Honda CR-V 2017-2026 Owner's Manual / Maintenance / Checking and Maintaining Wiper Blades

Replacing Light Bulbs

Headlight Bulbs When replacing, use the following bulbs. High beam headlight: 60 W (HB3 for halogen bulb type) * LED type * Low beam headlight: 55 W (H11 for halogen bulb type) * LED type * * Not available on all models Models with halogen headlights NOTICE Halogen bulbs get very hot when lit...

Checking Wiper Blades and Changing the Front Wiper Blade Rubber

Checking Wiper Blades If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces of the blade may scratch the window glass...

Other information:

Honda CR-V 2017-2026 Owner's Manual: If the Low Oil Pressure Indicator Comes On


Reasons for the indicator to come on Comes on when the engine oil pressure is low. What to do as soon as the indicator comes on Immediately park the vehicle on level ground in a safe place. If necessary, turn the hazard warning lights on. What to do after parking the vehicle Stop the engine and let it sit for about three minutes...

Honda CR-V 2017-2026 Owner's Manual: Exterior Checks


Make sure there are no obstructions on the windows, door mirrors, exterior lights, or other parts of the vehicle. Remove any frost, snow, or ice. Remove any snow on the roof, as this can slip down and obstruct your field of vision while driving...

Categories

Seat Belt Reminder

Honda CR-V. Seat Belt Reminder

The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts.

If the ignition switch is turned to ON Honda CR-V. Seat Belt Reminder *1 and a seat belt is not fastened, a beeper will sound and the indicator will blink. After a few seconds, the beeper will stop and the indicator will come on and remain illuminated until the seat belt is fastened.

read more

 
Copyright © 2026 www.hocrv.com