Honda CR-V: Engine Does Not Start / Checking the Engine
If the engine does not start, check the starter.
If you must start the vehicle immediately, use an
assisting vehicle or booster battery to jump start it.
Models with smart entry system
If the beeper sounds and the To Start, Hold Remote Near Start
Button message
appears on the driver information interface; and the ENGINE START/STOP
button
flashes and the engine will not start...
Other information:
*1:Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch.
*2:Canadian models only: Apply and hold the brake pedal before turning the
ignition on.
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface...
Turn the ignition switch to LOCK
*1 . Turn
the headlights and all accessories off.
Remove the fuse box cover.
Check the large fuse in the engine
compartment.
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one...