Honda CR-V: Interior Lights/Interior Convenience Items / Map Lights
Front
Models without panoramic roof
The map lights can be turned on and off by pressing the lens.
When the interior light switch is in the door activated position and any door is open, the map light will not go off when you press the lens.
Models with panoramic roof
The map lights can be turned on and off by pressing the button.
When the interior light switch is in the door activated position and a door is opened or interior light switch is in the ON position, the rear map light will not go off when you press the button.
Rear
Models without panoramic roof
The map lights can be turned on and off by sliding the switch.
Models with panoramic roof
The map lights can be turned on and off by pressing the button.
Interior Light Switches
ON
The interior lights come on regardless of
whether the doors are open or closed.
Door activated
The interior lights come on in the following
situations:
When any doors are opened...
Cargo Area Lights and Glove Box
Cargo Area Lights
The lights come on when you open the
tailgate.
Glove Box
Pull the handle to open the glove box. You
can lock the glove box with the master key or
the built-in key...
Other information:
Honda CR-V 2017-2023 Owner's Manual: Automatic Brake Hold
Keeps the brake applied after releasing the brake pedal until the accelerator pedal is pressed. You can use this system while the vehicle is temporarily stopped, like at traffic lights and in heavy traffic. WARNING Activating the automatic brake hold system on steep hills or slippery roads may still allow the vehicle to move if you remove your foot from the brake pedal...
Honda CR-V 2017-2023 Owner's Manual: Engine Compartment Fuse Box
L..
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- How to Use the Auto High-Beam
- Speed Dial
- Jump Starting Procedure
- New on site
- Most important about car
Seat Belt Reminder
The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts.
If the ignition switch is turned to ON
*1 and
a seat belt is not fastened, a beeper will sound
and the indicator will blink. After a few
seconds, the beeper will stop and the
indicator will come on and remain illuminated
until the seat belt is fastened.
