Honda CR-V: Fastening a Seat Belt / Seat Belt with Detachable Anchor
- Pull out the seat belt’s small latch plate and
the latch plate from each holding slot in the
ceiling.

- Line up the triangle marks on the small
latch plate and anchor buckle. Make sure
the seat belt is not twisted. Attach the belt
to the anchor buckle.

- Insert the latch plate into the buckle.
Properly fasten the seat belt the same way
you fasten the lap/shoulder seat belt.

WARNING
Using the seat belt with the detachable
anchor unlatched increases the chance of
serious injury or death in a crash.
Before using the seat belt, make sure the
detachable anchor is correctly latched.
To unlatch the detachable anchor, insert the latch
plate into the slot on the side of the anchor buckle.

The front seats have adjustable shoulder anchors to accommodate taller and
shorter
occupants.
Move the anchor up and down while
pulling the shoulder anchor outward...
If you are pregnant, the best way to protect yourself and your unborn child
when
driving or riding in a vehicle is to always wear a seat belt and keep the lap
part of the
belt as low as possible across the hips...
Other information:
Front
Models without panoramic roof
The map lights can be turned on and off by
pressing the lens.
When the interior light switch is in the door activated
position and any door is open, the map light will not
go off when you press the lens.
Models with panoramic roof
The map lights can be turned on and off by
pressing the button...
* Not available on all models
The rear cargo cover can be used to conceal
items in the cargo area and protect them from
direct sunlight.
To extend:
Slightly lift up on the handle at the center
edge of the cover to unhook each end, then
pull the cover rearward and clip the mounting
rods in the hooks at both sides of the tailgate
opening...