Honda CR-V: Operating the Switches Around the Steering Wheel / Defogger/Heated Door Mirror
This system consumes a lot of power, so turn it off when the window has been defogged or deiced. Also, do not use the system for a long period when the engine is idling. This may weaken the battery, making it difficult to start the engine.
Models with heated door mirror
When the outside temperature is below 41°F (5°C), the heated door mirror may activate automatically for 10 minutes when you set the power mode to ON.
Brightness Control
With the parking lights are turned on and the
ignition switch is in ON *1 , you
can use the
brightness control knob to adjust instrument
panel brightness...
Rear Defogger/Heated Door Mirror* Button
* Not available on all models
Press the rear defogger and heated door mirror button to defog the rear
window
and mirrors when the ignition switch is in ON
*1 ...
Other information:
Honda CR-V 2017-2026 Owner's Manual: Emissions Testing
Testing of Readiness Codes Your vehicle has readiness code as part of the onboard self diagnostic system. Some States use these codes for testing to verify whether your vehicle's emissions components are working properly. The codes may not be read properly if testing is performed just after the battery has gone dead or been disconnected...
Honda CR-V 2017-2026 Owner's Manual: Changing the Rear Wiper Blade Rubber
Raise the wiper arm off. Pivot the bottom end of the holder up until it comes off from the wiper arm. Slide the blade out of the holder. Remove the retainers from wiper blade and mount to a new rubber blade. Slide the new wiper blade onto the holder...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Display Setup
- Accessory Power Sockets
- Head Restraints
- New on site
- Most important about car
Seat Belt Reminder
The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts.
If the ignition switch is turned to ON
*1 and
a seat belt is not fastened, a beeper will sound
and the indicator will blink. After a few
seconds, the beeper will stop and the
indicator will come on and remain illuminated
until the seat belt is fastened.
